Just a hi from JaHeLi

[Knight]

Hi All,  JaHeLi electronics and parts is constantly improving their products. In our young existence are working on enhancing our IO boards to support more than DCS only. We are currently testing the IO software on BMS which is very faulty proof while program it.  For DCS programming is to simple.  Really,  select the DCS program location and start doing addressing the correct ports.  You don’t have to think about key bindings it’s already imported.  To cool.
For the pitbuilders which are known with Pokeys you al know how conflict sensitive it can be without a clear registration in Excel sheets.
well with the JaHeLi IO software that’s done and forgotten.  You import the pitbuilders keyfile (recommended) from the BMS config location and you do basically the same as I wrote in the DCS part. select the subject (like you know in the BMS keyfile)  and from that subject you choose your key.  No need to think about key bindings at all.  It’s just select the toggle, push button or part on that particular channel/port and your good to go.

  [ You are not allowed to view attachments ]  

Al our products are meant to be related to eachother.
Our current combined action is a full working engine gauges set.  Plug and play.

Here some pictures from our recent actions.
I’m also working with other pitbuilders which give perfect input and support.   Enough writing…😊

  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  


To be continued.

Regards Knight (Ak Maarten de Ridder)

[Rufus]

Cool stuff, Knight... !

[Cupra]

The stick base looks nice.. but where can the needed force sensor be ordered?

[Knight]

That’s indeed a next question.  I understood that the FCC3 delivery from Vipergear has stopped.   Not sure how and If that will have a follow up. 
If people have a FCC3 that will fit. 

[Rufus]

It looks to be Ribbstick-ready...which is also a good.

[Atlas]

How goes the project for dials/rotary knobs?

[sagrzmnky]

What is that stick base made of and how much?

[tiger-31]

Looking forward to seeing more! Keep up the good work!

[Knight]

 Hi @sagrzmnky ,  I contacted “Viper-Charlie” and understood this full aluminum https://www4.jaheli.nl/product-category/cockpit-hardware/ base will be available within a few weeks.
It will be ordable on his cockpit hardware part in the JaHeLiSimulator.com site.

https://www4.jaheli.nl/product-category/cockpit-hardware/

You can also send an email to info@jahelisimulator.com

Regards

Knight

[sagrzmnky]

 

[64Driver]

How about running steppers off the boards?

[Nigel]

All your parts look GREAT Knight, glad you are here!!
Nigel