Viperpit(s).org

Commercial => WEBSHOP - WWW.REALSIMWORLD.DK - Simulator parts by Kukki => Topic started by: Kukki on February 04, 2019, 08:35:43 AM

Title: ICP from Realsimworld
Post by: Kukki on February 04, 2019, 08:35:43 AM
Hello Gents!

A little sneak peek

We have been working on the ICP for some time now and we are ready to show VP member som pictures of it.

First the ICP pcb´s are all professional made and the pushbutton pressure is as close to the real ICP as possible (might be better) We made the pcb the same way but used better components.
Acrylic faceplate is all CNC and professional painted and laser engraved.
ICP is made 99,99% to the real ICP
Backlight/controller module is mounted on the back of the ICP backplate and connected to a little control box where you put in your 12V and 5V + the usb and its then connected to the ICP with a single RJ45 cable, very nice solution, and it will fit into the real hudblock and RSW hudblock as well as your own hudblock solution.
Backlight on the ICP is RGB LED´s and there is a little SW with the ICP so yuou can configure it to the backlight color you have in your pit.  So no problem with White or NVIS or pink backlight :-)
ICP is recognised in windows as a normal joystick (labled ICP) and will be pure DX controlled so no programming SW needed, just go into your favorite sim and start assign the buttons, DCS, toggles and TW.
even the DCS and toggle switches are made to just plug into the controller pcb and work that way.
SO ITS FULL PnP and ready to plug in and start using.

Thumbwheels is a chapter for it self, total NEW design with 2019 technology with hall sensor technology and magnets, no touching parts and they will last forever.
TW can be purchased seperate as a single L or R TW and can be connected to your own pcb card there can controll a potmeter.
They are also made 99,99% accurate to the real TW

New ICP backplate there is predrilled to our ICP so it will fit perfect, and comes in US and NATO MLU version.

We will sell the ICP as a basic version with the ICP + Light/controller board and the converter box + all cables.

Addon can be purchased:
Thumbwheels
ICP backplate
IR-Sensor for the NATO MLU

We chose to split up the ICP in basic configuration and then all the add on´s because many have some parts and only need TW, backplate the ICP etc.

ALL PRICES are now fixed there, but we will not be ready to sell it before after the Chinese New Year.

DCS switch and the 2 toggle switches we are working on, it might be that we will not provide those (depends if we can find a good solution)
but we will provide a link where you can buy them.

DCS switch is seen from prices from 60 -100 usd (OTTO Part # T4-CN111N) fit perfect to our ICP Backplate.
toggle switches are seen at prices from approx 35 - 55 usd a piece.

I hope you will like it.

Here is the link to the webshop where you can see some pictures of the ICP put together.
https://www.realsimworld.dk/f16-simulator-shop/center-system-parts/icp-intergrated-control-panel


Note. new pictures will come and show exatcly what you get in the basic configuration and you see the add on option there.
Those add on option will have a chk box so its easy for you to add them if you need them to your ICP.

Kukki

And YES I know the com2 and iff are swoped :-)
Title: Re: ICP from Realsimworld
Post by: Blaze on February 04, 2019, 12:21:40 PM
Looks like another big score for RSW!

Nice work brother Kukki!
Title: Re: ICP from Realsimworld
Post by: Skins on February 04, 2019, 12:25:04 PM
Just awesome work!  :beer:

James
Title: Re: ICP from Realsimworld
Post by: Catcher on February 04, 2019, 04:17:27 PM
Highest standart as usual :thumbsup:
Title: Re: ICP from Realsimworld
Post by: Marvin on February 04, 2019, 10:10:03 PM
Kukki,

Is the ICP not back lit for a reason?
Title: Re: ICP from Realsimworld
Post by: Kukki on February 05, 2019, 01:18:04 AM
Kukki,

Is the ICP not back lit for a reason?

What do you meen, the icp is backlit
Title: Re: ICP from Realsimworld
Post by: DanW on February 05, 2019, 01:25:12 AM
I guess he meant the IPC label is not back lit.

Very nice job on the ICP. I really like the uniform nice backlight across the panel and the buttons.. That's exactly what bothers me in case of my IPC and make me fill that I need to build a 3rd one which must be perfect.
Dan
Title: Re: ICP from Realsimworld
Post by: Kukki on February 05, 2019, 03:05:23 AM
I guess he meant the IPC label is not back lit.

Very nice job on the ICP. I really like the uniform nice backlight across the panel and the buttons.. That's exactly what bothers me in case of my IPC and make me fill that I need to build a 3rd one which must be perfect.
Dan

Ohe OK, its not backlit on the Real ICP, that is why

Here is a picture of my real ICP and under is a picture of you own ICP @Marvin  :thumbsup:
Title: Re: ICP from Realsimworld
Post by: KK on February 05, 2019, 04:43:50 AM
I agree with Kukki.
Indeed the ICP writing on the lightplate is *not* backlighted.
I just checked it on my SDI ICP.

You may notice that on some ICP's its written BRT where others have INT.
Title: Re: ICP from Realsimworld
Post by: Kukki on February 05, 2019, 04:49:18 AM
I agree with Kukki.
Indeed the ICP writing on the lightplate is *not* backlighted.
I just checked it on my SDI ICP.

You may notice that on some ICP's its written BRT where others have INT.

Cool Klaus  :thumbsup: and yes there is so many different real versions of the ICP out there, I think I have seen 4 different.
Title: Re: ICP from Realsimworld
Post by: Marvin on February 05, 2019, 07:23:20 AM
You sure about that one?  I have two of them and one clearly has a bad bulb and the other does not.  ;)

Indeed it *IS* back lit.  Lol
Title: Re: ICP from Realsimworld
Post by: Kukki on February 05, 2019, 07:53:07 AM
OK @Marvin you are right on your ICP there, but the one you show with nvis dont have, mine dont have, the one in China dont have.  it might be that nvis dont have that bulb under the "ICP" label.

But anyway, our ICP dont have the "ICP" lable backlit.
Title: Re: ICP from Realsimworld
Post by: Marvin on February 05, 2019, 07:57:03 AM
OK @Marvin you are right on your ICP there, but the one you show with nvis dont have.  it might be that nvis dont have that bulb under the "ICP" label.

But anyway, our ICP dont have the "ICP" lable backlit.

I don’t think so.  That is an NVIS ICP (check on the bottom right of the panel)  I just removed the filters for a test as I was comparing white and the green look.  My other ICP has the same bulb on the PCB but it is burnt out my guess.   Both are made in 2000 as th dates on the rear.  So perhaps it was on later models?



Title: Re: ICP from Realsimworld
Post by: Kukki on February 05, 2019, 08:38:39 AM
I dont know, all I know we have 4 real ICP´s here and all of them dont have the "ICP" lable light up, and I doubt that all the bulbs there is broken.  And I modd my White BL ICP to nvis and put nvis lenses in there, and there was no bulb under the ICP label.

But all in all cool info, now we got a bit more wise on the ICP  :thumbsup: :thumbsup: :thumbsup:
Title: Re: ICP from Realsimworld
Post by: Marvin on February 05, 2019, 08:53:26 AM
I dont know, all I know we have 4 real ICP´s here and all of them dont have the "ICP" lable light up, and I doubt that all the bulbs there is broken.  And I modd my White BL ICP to nvis and put nvis lenses in there, and there was no bulb inder the ICP label.

But all in all cool info, now we got a bit more wise on the ICP  :thumbsup: :thumbsup: :thumbsup:

Yeah that’s we often forget.  The plan is like 60 years old and handled by many many different contractors to build parts.  Lol
Title: Re: ICP from Realsimworld
Post by: DanW on February 05, 2019, 09:01:46 AM
Take a look at this video @22s
https://www.youtube.com/watch?v=SixYwbkrJ1A
ICP writing is not back lit.
Title: Re: ICP from Realsimworld
Post by: Marvin on February 05, 2019, 09:38:15 AM
I think we established some are and some are not.  Hence my photos.
Title: Re: ICP from Realsimworld
Post by: John Fredrik on February 05, 2019, 11:38:14 AM
Take a look at this video @22s
https://www.youtube.com/watch?v=SixYwbkrJ1A
ICP writing is not back lit.

A good example we cannot go wrong mixing green and white backlight for our cockpit. This cockpit was some christmas three :D
Title: Re: ICP from Realsimworld
Post by: mrwell on February 05, 2019, 01:05:35 PM
Actually I like that, since we are not really using NVG:

  [ You are not allowed to view attachments ]  
Title: Re: ICP from Realsimworld
Post by: raptor on February 05, 2019, 03:10:33 PM
Actually I like that, since we are not really using NVG:

This is a HAF PX4, nvis compatible.
Title: Re: ICP from Realsimworld
Post by: mrwell on February 06, 2019, 01:30:19 PM
Oh, great so NVG compatible is not only green backlight... interesting , thanks
Title: Re: ICP from Realsimworld
Post by: Nikolas_A on February 06, 2019, 01:33:50 PM
AFAIK the blackout switch turns off all non-NVG compatible lights
Title: Re: ICP from Realsimworld
Post by: mrwell on February 06, 2019, 01:39:41 PM
In my pic MISC and LG panel are white thus they should be NVG compatible...
Title: Re: ICP from Realsimworld
Post by: raptor on February 06, 2019, 01:46:06 PM
Nikos is right, HOBOS switch on the throttle will turn off all non-nvis friendly internal lights, including the white backlit panels.
Title: Re: ICP from Realsimworld
Post by: Kukki on February 06, 2019, 04:05:35 PM
Nikos is right, HOBOS switch on the throttle will turn off all non-nvis friendly internal lights, including the white backlit panels.

Cool stuff guys  :thumbsup:

How I use my hobo switch on the tqs grib.
On my internal lightning panel I have a mag switch to turn on the NVG, so when I turn that solenoid switch on it stays on (mag hold) and I get the NVG goggles on in BMS and if I push the hobo switch then it cuts the pover to the NVG solenoid and it flips back to off and turn off the NVG goggles in BMS.

We will never use real NVG goggles in BMS so I thought it was a nice way to use the solenoid mag switch and the hobo switch.

just what I have done  :thumbsup:
Title: Re: ICP from Realsimworld
Post by: raptor on February 06, 2019, 04:45:36 PM
Clever and practical..  :thumbsup:
Title: Re: ICP from Realsimworld
Post by: mrwell on February 07, 2019, 12:11:31 AM
Nikos is right, HOBOS switch on the throttle will turn off all non-nvis friendly internal lights, including the white backlit panels.

Well, that’s right, but MISC and LG panels are mandatory to be on for obvious reasons, therefore something we’re missing...
Title: Re: ICP from Realsimworld
Post by: Rufus on February 08, 2019, 05:18:14 PM
...ok...DROOOL...I'm in... :outthewindow: ..!
Title: Re: ICP from Realsimworld
Post by: Marvin on March 23, 2019, 10:06:41 AM
Maybe Kukki is being modest here?  Not sure why he hasn’t shown this off yet???

Their ICP is freaking amazing!!  I might just sell my real one and buy theirs.  They have some serious engineering done here along with adjust colour for back lighting!!   Totally buying one!

https://youtu.be/JpvlmlA2cgU
Title: Re: ICP from Realsimworld
Post by: Kukki on March 23, 2019, 10:09:18 AM
ICP for BMS and DCS for the F-16 when it comes.
Our new ICP for Falcon BMA and DCS is now on the marked.
https://realsimworld.dk/simulator-shop/f-16-simulator-shop/center-system-parts/icp-intergrated-control-panel

http://www.youtube.com/watch?v=JpvlmlA2cgU

Enjoy Gents
Title: Re: ICP from Realsimworld
Post by: tiger-31 on March 23, 2019, 10:17:32 AM
Very nice work.  :thumbsup: Congrats on that one  :clap:
Title: Re: ICP from Realsimworld
Post by: Rufus on March 23, 2019, 09:43:57 PM
...I'm all in after I get back from travel... :countingmoney: .
Title: Re: ICP from Realsimworld
Post by: Kukki on March 23, 2019, 11:04:52 PM
...I'm all in after I get back from travel... :countingmoney: .

Thanks for supporting us Rufus 👍🏻👍🏻👍🏻
Title: Re: ICP from Realsimworld
Post by: Kukki on March 24, 2019, 02:24:05 AM
Gents also try to read here, this ICP is a MASTERPIECE

Im waiting on a batch of the REAL OTTO 4 way dcs switches and the 2 toggle switches, when they are here then we will offer those too
And some will ship to china so if you order a full ICP with all, then its tested with all mounted 👍🏻👍🏻👍🏻

Try read this: http://www.realsimworld.com/en/new/ICP-Album.html

Kukki
Title: Re: ICP from Realsimworld
Post by: tiger-31 on March 24, 2019, 02:30:46 AM
Gents also try to read here, this ICP is a MASTERPIECE

Im waiting on a batch of the REAL OTTO 4 way dcs switches and the 2 toggle switches, when they are here then we will offer those too
And some will ship to china so if you order a full ICP with all, then its tested with all mounted 👍🏻👍🏻👍🏻

Try read this: http://www.realsimworld.com/en/new/ICP-Album.html

Kukki

Read!
Title: Re: ICP from Realsimworld
Post by: Red Dog on March 24, 2019, 03:40:07 AM
Masterpiece indeed !!
Title: Re: ICP from Realsimworld
Post by: henkie on March 24, 2019, 05:58:18 AM
Welll, my wife gets a new kitchen in two months time  :outthewindow:
Need to start saving, this beauty is on the top of my list  :countingmoney:
Title: Re: ICP from Realsimworld
Post by: Kukki on March 24, 2019, 01:17:12 PM
Thanks guys, we really did all we could to get this ICP done the perfect way, and Alex our Electronic engineer have really outdone him self here.  :thumbsup: :thumbsup: :thumbsup:
Title: Re: ICP from Realsimworld
Post by: jjbravo on March 24, 2019, 01:46:25 PM
Can’t wait to use it!
Hopefully the switches will be ready to order soon.

Great Job!
Title: Re: ICP from Realsimworld
Post by: Verisimilitude on March 29, 2019, 09:20:44 PM
Are there plans to continue producing the ICP after the initial 20 sell out? If so, will there be stock kept on hand, made-to-order, or until a batch size is reached?
Title: Re: ICP from Realsimworld
Post by: Kukki on March 30, 2019, 02:13:07 AM
Are there plans to continue producing the ICP after the initial 20 sell out? If so, will there be stock kept on hand, made-to-order, or until a batch size is reached?

It all depends, if still big interest after the first 20 then yes, if not this is the batch we only make.
Title: Re: ICP from Realsimworld
Post by: Kukki on March 30, 2019, 03:29:06 PM
Gents please be gentlemen, and its super to have opinions here and discuss and disagree, but please keep the language proper.

I have now deleted the posts here there was derailing a bit (my self included)
Title: Re: ICP from Realsimworld
Post by: Marvin on March 30, 2019, 03:34:41 PM
Awe really??  It's the vulgar language and insults that keeps this place interesting??   :lolsign:
Title: Re: ICP from Realsimworld
Post by: Kukki on March 30, 2019, 03:37:50 PM
Awe really??  It's the vulgar language and insults that keeps this place interesting??   :lolsign:

hehe  :lolsign:  have a great weekend Gents.
Title: Re: ICP from Realsimworld
Post by: Cupra on March 31, 2019, 09:48:41 AM
Looking forward.. maybe this part is still available if I need it in 2020.. and if not.. I continue my hunt  :harhar:
Title: Re: ICP from Realsimworld
Post by: Rufus on April 01, 2019, 02:36:22 PM
Just ordered mine... :outthewindow: ...DROOOOOL!
Title: Re: ICP from Realsimworld
Post by: henkie on April 01, 2019, 03:13:39 PM
Me too !   ;D   :outthewindow:   But worth it  :thumbsup:
Title: Re: ICP from Realsimworld
Post by: Kukki on April 01, 2019, 04:40:15 PM
Thanks for supporting GENTS, and more great parts will come  :thumbsup: :thumbsup: :thumbsup:
Title: Re: ICP from Realsimworld
Post by: jjbravo on April 01, 2019, 05:39:31 PM
Hey Kukki, Do you have a roadmap of what you will be working on next?

Thanks for making these products available to us.
Title: Re: ICP from Realsimworld
Post by: Kukki on April 01, 2019, 05:42:22 PM
Hey Kukki, Do you have a roadmap of what you will be working on next?

Thanks for making these products available to us.

we will very very soon come with a new full DIY ACES II seat in full metal, hos hold your horses, because this seat will be very very nice.

And there will come more small parts for the pit + we are working on other jet´s too.   Lets see what the future will bring :-)
Title: Re: ICP from Realsimworld
Post by: jjbravo on April 01, 2019, 05:50:02 PM
Awesome, thanks Kukki!  :countingmoney:
Title: Re: ICP from Realsimworld
Post by: raptor on April 01, 2019, 05:52:59 PM
 :outthewindow:
Title: Re: ICP from Realsimworld
Post by: Nomad on April 01, 2019, 07:41:17 PM
Awesome products!
Title: Re: ICP from Realsimworld
Post by: Rufus on April 01, 2019, 07:50:13 PM
Hey Kukki, Do you have a roadmap of what you will be working on next?

Thanks for making these products available to us.

we will very very soon come with a new full DIY ACES II seat in full metal, hos hold your horses, because this seat will be very very nice.

And there will come more small parts for the pit + we are working on other jet´s too.   Lets see what the future will bring :)

I'll be looking for the seat...minus the parts that I already have from you.  How about the cloth parts for the parachute container?  I'm sure there are more people than me that are wanting to restore a real one... :whistle: .
Title: Re: ICP from Realsimworld
Post by: Kukki on April 02, 2019, 03:07:25 AM
Gents ist all coming  :thumbsup:
Title: Re: ICP from Realsimworld
Post by: Kukki on June 06, 2019, 05:58:53 AM
Gents here is a picture of our ICP.

Customers are recieving it right now, so im looking forward to hear what they say about it  :thumbsup:

Its just such a fantastic piece of HW.

NOTE. ONLY 28 are made.

NATO MLU and US VERSION - MULTI COLOR BACKLIGHT.
Title: Re: ICP from Realsimworld
Post by: Zeight on June 06, 2019, 12:44:07 PM
They really really look good. Drooling.
Title: Re: ICP from Realsimworld
Post by: JCook on June 06, 2019, 02:00:22 PM
Amazing work.
Title: Re: ICP from Realsimworld
Post by: Rufus on June 06, 2019, 08:21:39 PM
I received mine last Monday... :yihaw: ...and it IS a total gem!  Absolutely stunning.

Standby for an update flood in my build thread after I get some time to take snaps and fiddle...
Title: Re: ICP from Realsimworld
Post by: Nigel on June 07, 2019, 07:04:13 AM
OK @Marvin you are right on your ICP there, but the one you show with nvis dont have.  it might be that nvis dont have that bulb under the "ICP" label.

But anyway, our ICP dont have the "ICP" lable backlit.

I don’t think so.  That is an NVIS ICP (check on the bottom right of the panel)  I just removed the filters for a test as I was comparing white and the green look.  My other ICP has the same bulb on the PCB but it is burnt out my guess.   Both are made in 2000 as th dates on the rear.  So perhaps it was on later models?
Jody,
just curious, who makes yours, is it SDI or maybe Photo-Etch?
Title: Re: ICP from Realsimworld
Post by: KK on June 07, 2019, 08:03:36 AM
Quote
just curious, who makes yours, is it SDI or maybe Photo-Etch?

My NVG is made by SUNDIAL and my white light is from SDI (a Woman-owned small business)  8)
Title: Re: ICP from Realsimworld
Post by: henkie on June 08, 2019, 10:43:16 AM
I received the ICP from RSW last week.
I just had a short peek out of curiosity (need to finish a new kitchen first), but that short peek was enough to be impressed by the quality, the looks, and everything  :hail:
Fantastic product, love it  :clap:

Never before got an item in such a professional package  :cheerleader:
Title: Re: ICP from Realsimworld
Post by: Rufus on June 08, 2019, 01:52:27 PM
...heh...you beat me... :brickwall: ...I got mine last week too... :yihaw: ! 

I already had a backplate, so I have to drill some holes - I'll be detailing that in my build thread for others that are in the same sitch, but yeah - this thing is TOP flight... :thumbsup: !

The driver software is quite the ticket too...
Title: Re: ICP from Realsimworld
Post by: henkie on June 08, 2019, 02:29:28 PM
In an email, I received from Alex the assembly/disassembly instruction manual.
It is just two sides (one leaf of paper  :D), and I have read it ... Because I have the 2 switches and the 4-way switch, I ordered the ICP without the switches.
To install the switches you have to do an almost complete disassembly, mount the switches and assemble everything ... making me wish I had bought the ICP *with* the switches installed  :whistle:

So, if you are still thinking of buying the ICP, I strongly suggest to buy *everything*, because then this really fantastic ICP is truely Plug&Play in your pit !!!
 :vprules:
Title: Re: ICP from Realsimworld
Post by: Rufus on June 08, 2019, 04:56:44 PM
Yes - I got the same e-mail from Alex and it's going to be very helpful.  I'm sure that when I bought my backplates that this ICP was just a dream, so I have to drill as well as otherwise assemble it - it looks pretty easy to dis-assemble and put back together, it's drilling the backplate that will require some skilz...which is why Henkie beat me to the publishers!  I already had the toggles, so I only needed the kit minus backplate and toggles.

BTW: Kukki's backplates will also fit to Mike's ICP panel if you have one of those and are semi-rolling your own...I started out that way but my backplate for it had/has it's thumb wheel mounts broken, so I bought Kukki's as a hopeful replacement.  Which will also allow using Kukki's thumb wheels, if you're down the track to rolling your own.

I haven't checked to see how Kukki's thumb wheels might fit to Mike's backplate, but I have a feeling they will.  And Mike's backplate will also fit to Kukki's HUD.
Title: Re: ICP from Realsimworld
Post by: jjbravo on June 12, 2019, 02:41:43 PM
I just got mine and I bought the switches as well.
Everything was assembled and looks amazing!!!

Thanks Realworldsim, this is awesome.
Title: Re: ICP from Realsimworld
Post by: Marvin on June 13, 2019, 12:57:38 AM
Wow that is really nice!!   
Title: Re: ICP from Realsimworld
Post by: Biggles on June 13, 2019, 05:51:00 PM
Really nice looking piece of hardware.

I would like to make one critical note though.
Wouldn't it look way better using waxed nylon lacing cord instead of those big lumpy tie wraps ?

It all looks professional at high level, just to be finished with this low level big chunky wraps.

Just my 2 cents.

Biggles.
Title: Re: ICP from Realsimworld
Post by: Marvin on June 13, 2019, 08:54:40 PM
Really nice looking piece of hardware.

I would like to make one critical note though.
Wouldn't it look way better using waxed nylon lacing cord instead of those big lumpy tie wraps ?

It all looks professional at high level, just to be finished with this low level big chunky wraps.

Just my 2 cents.

Biggles.

I’m thinking no one is going to see the back once it’s installed in the pit?  ;)