Who's Online
Recent Topics/Posts
|
Pages: « 1 2 3 4 5 6 7 8 9 10 »
61
« Last post by ulti on April 13, 2024, 02:57:14 PM »
Maybe you can try this https://www.weapondeliveryplanner.nl/about/hud.htmlI use it for years now in my cockpit setup. Greetings Martin
62
« Last post by Tulkas on April 13, 2024, 02:53:05 PM »
I don't have VR yet in the pit, I enjoy VR in my "other cockpit" and with another computer.  Not sure yet how am I going to convert the pit to mix reality  but it will happend eventually In VR it's easier, you just place your head where you want it and re-center VR.
With the screens I setup a custom view and mapped an always on directx button to the custom view key, so when I entered the cockpit, it would always be in my custom view. Worked pretty well.
63
« Last post by jjbravo on April 13, 2024, 02:00:46 PM »
In VR it's easier, you just place your head where you want it and re-center VR.
With the screens I setup a custom view and mapped an always on directx button to the custom view key, so when I entered the cockpit, it would always be in my custom view. Worked pretty well.
64
« Last post by Tulkas on April 13, 2024, 12:47:00 PM »
You can set a custom view and use a key command to set it.
Look in the technical manual in section 4.3.1
Thanks! Will check!
65
« Last post by Atlas on April 13, 2024, 12:40:27 PM »
Why rebuild the cockpit? Could you not just raise the seat up and then find a way to fix it in place once at the right height?
66
« Last post by Tulkas on April 13, 2024, 11:26:57 AM »
The BMS viewpoint should be the "correct" one at the design eye. Could you adjust your position instead?
Not without rebuilding the complete cockpit  I'd think is easier to adjust the POV a couple of degrees... Cannot be clamed that default position is the good one for everybody, the zoom for example is going to depend on the size of your screen/ projection.
67
« Last post by Atlas on April 13, 2024, 11:06:46 AM »
The BMS viewpoint should be the "correct" one at the design eye. Could you adjust your position instead?
68
« Last post by jjbravo on April 13, 2024, 11:06:20 AM »
You can set a custom view and use a key command to set it.
Look in the technical manual in section 4.3.1
69
« Last post by Tulkas on April 13, 2024, 10:55:25 AM »
Now that I have installed a HUD frame I have to slightly move the view and reduce the zoom every time I start a flight. Also when centering TrackIR is slightly too high.
Is there a way to save the viewpoint so it is spot on everytime I start the sim?
Thanks!
Tulkas
70
« Last post by questerymj on April 13, 2024, 09:12:47 AM »
(My apologies i havent worked out how to use the quote feature yet).
I found the same with YAME, its a nightmare to setup, but I have got the CPD and the ATD working perfectly with BMS just for testing. Have been flying around in BMS for the last couple of days with it on my workstation and its been working great (I had to use version 2.0.0.44, version 1.2.1 did not work at all). I have my LCD turning up soon for my CPD so will test it out properly then.
As for DCS, still have had no luck with getting it to work with DCS/DCStoF4, however I will try what questerymj mentioned and get rid of all the other exports and just put in the DCStoF4 and see if that fixes it (thank you for suggesting that  ). I also have Tacview and DCS-BIOS so it might be an issue caused by one of them as suggested...
Overall, pretty happy with the CPD/ATD in BMS. Thank you both for your help! I will update as to whether I got DCS working
I will suggest you try a clean export.lua when someday you want to test...it's 99% DCS-bios conlict with DCStoF4 because I still not disslove this issue.XD And aobut YAME64/CPD,it's not so hard do configure if you know the basic idea (define a area for YAME and put instruments inside there). You can use arrow key to trim the instrument location like in Helios. I always keep YAME in my desktop because I love CPD and wish to use it someday withput any issue...I will share the experience when I successful XD
Pages: « 1 2 3 4 5 6 7 8 9 10 »
|
Guests: 3
Hidden: 0
Users: 0
Recent Posts