Hi All, After a couple of hours and a bit of learning I found a simple way to set up display extraction For DCS. The BMS part is also working but that coms later.
How to get this working.
[ You are not allowed to view attachments ]
On this.
[ You are not allowed to view attachments ]
1. Download the latest F16 profile from Capt Zeen
https://mega.nz/file/E9NDQayS#xF_juB1ykhClU-CLIPZ_Ws8HHa-ay1nIEY4Wh2eqQ-kand install it.
2. Remove al items from the profile you dont want.
What I did is the following. I found the gauges in the list on the right. And I removed all other what I didn't use. Simple Delete it.
[ You are not allowed to view attachments ]
select and delete
[ You are not allowed to view attachments ]
and finaly end here.
[ You are not allowed to view attachments ]
Now I hide some items in the Gauge which I don't need. You can delete them too. Or hide.. Both woirk fine.
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
You can open and close the sections..
[ You are not allowed to view attachments ]
Same for other gauges.
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
Save the Helios File.
[ You are not allowed to view attachments ]
Use the save option in Helios Profile editor as many as you need. and start the Helios control center to see Live your positions.
Adjust it until the Gauges are on the correct positions.
Now we go to DCS.
Good advice to find the correct position of the gauges.
You all use a display extraction tool I guess.. Just start it.. And Press PRINTSCREEN on your keyboard.
I use YAME..
[ You are not allowed to view attachments ]
Open the app “Paint” in Windows and paste the screendump.
You are now able to identify the position very easy with your mouse. Just remember every Left TOP and Left Bottom position.
Check the Yellow.
[ You are not allowed to view attachments ]
Use that data and create a NEW LUA file. and save it in the correct location
C:\Users\name\Saved Games\DCS.openbeta\Config\MonitorSetup
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
And Fly.....
Contact me for questions..
Regards,
Knight.
BMS setup will Follow.