Who's Online
 Guests: 104 Hidden: 0 Users: 3 Users Online:
Recent Topics/Posts
|
Pages: 1 2 3 4 5 6 7 8 9 10
1
« Last post by questerymj on April 20, 2024, 12:50:58 PM »
As far as I know FStS ask for mega2560 only to gain more memories for all codes it need. I don't date test thisXD
2
« Last post by mihi4 on April 20, 2024, 11:57:37 AM »
For the time being, there is not "canopy sealing", but I think I am going to add a switch for it as well, just in case it gets implement in the future, but probably it won't be necessary.
Hmmm.. But that would also mean, you will need to have a real canopy to close that switch, wouldn't it?
Otherwise, how is it going to activate?
Not really, you can see the horizontal leg of the spider with the semicircular bump at the end that push the seal switch, is just to place one more switch right there. Probably unnecessary, but is not a big job and I am tired of opening and revisiting parts of the cockpit to upgrade 
 You're totally right! I'm glad I still have the rework of the left side ahead of me 
3
« Last post by Tulkas on April 19, 2024, 06:27:58 AM »
For the time being, there is not "canopy sealing", but I think I am going to add a switch for it as well, just in case it gets implement in the future, but probably it won't be necessary.
Hmmm.. But that would also mean, you will need to have a real canopy to close that switch, wouldn't it?
Otherwise, how is it going to activate?
Not really, you can see the horizontal leg of the spider with the semicircular bump at the end that push the seal switch, is just to place one more switch right there. Probably unnecessary, but is not a big job and I am tired of opening and revisiting parts of the cockpit to upgrade
4
« Last post by mihi4 on April 19, 2024, 02:19:41 AM »
For the time being, there is not "canopy sealing", but I think I am going to add a switch for it as well, just in case it gets implement in the future, but probably it won't be necessary. Hmmm.. But that would also mean, you will need to have a real canopy to close that switch, wouldn't it? Otherwise, how is it going to activate? I think a better solution would be to use a double pole switch on the spider, so the spider activates the spidercommand and sealcommand (I highly doubt, we will ever see something like that implemented. To me that's the same like all the internal fuel valves, power latches, and so on. Those will be enganged by the system, but not by the pilot) 
I think this settles it?
Looks perfect to me! greetings michi
5
« Last post by Atlas on April 18, 2024, 11:35:54 AM »
@Tulkas you can map it to the spider for now and then re-map it later if/when BMS implements it. At the moment, you can hear a soft hiss for a second or two when you close the spider.
6
« Last post by henkie on April 18, 2024, 07:52:47 AM »
Never say never, but I am sure that I will not implement sealing inflation 
7
« Last post by Tulkas on April 18, 2024, 05:25:57 AM »
Ahhh, now I see 
There are two roller switches!
That's a new puzzle for me too 
According to Blaze's post the second one is the safety switch driving the caution light.
Looks like for us pitbuilders this one is not really important, since the lights are controlled by the software anyways...
Ok, I just went and downloaded BMS 4.37 to take a look at the keyfile:  Canopy open, stop and close are for the toggle switch. The new bit is canopy lock, unlock, which I assume is for the warning light? this will be the roller switch. This one actually is the one which tells the sim the position of your physical spider. For the time being, there is not "canopy sealing", but I think I am going to add a switch for it as well, just in case it gets implement in the future, but probably it won't be necessary. I think this settles it?
8
« Last post by Cupra on April 18, 2024, 04:06:01 AM »
9
« Last post by mihi4 on April 18, 2024, 01:36:18 AM »
Ahhh, now I see
There are two roller switches!
That's a new puzzle for me too
According to Blaze's post the second one is the safety switch driving the caution light. Looks like for us pitbuilders this one is not really important, since the lights are controlled by the software anyways...
10
« Last post by Sneakpeek on April 17, 2024, 11:53:20 PM »
I have the exact same problem.
Managed to soothen it by raising the seat a bit. Never got it to work perfectly though, as the size of the HUD on my screen setup (214°) is way off the size on my "physical HUD". But it works alright most of the time and the gain in immersion outweighs it big time.
Didn't know the HUD-View only tool. While it seems OK (to look around, you'd have to assign a keybinding then, I think), I suppose that it might break the multiplayer data integrity check of BMS. Same goes for custom views. Not sure about that, though.
I still hope, that BMS will come up with a solution sometime.
Cheers,
SP
Pages: 1 2 3 4 5 6 7 8 9 10
|
Recent Posts
